Independent metal AM
Xact XM300G vs Meltio M600
Start with the differences that could affect your part. Confirm the complete configuration with each supplier.
The big difference
- Xact XM300G uses Powder bed fusion · laser powder bed fusion (LPBF); Meltio M600 uses Directed energy deposition · laser-wire DED.
- These specifications alone cannot tell us which machine will make a given part faster or cheaper.
Side by side
| Question | Xact XM300G | Meltio M600 |
|---|---|---|
| Quick description | LPBF machine; compare published build space and laser configuration below. | Wire-fed DED machine; compare energy source, feedstock and published envelope below. |
| Process | Powder bed fusion · laser powder bed fusion (LPBF) | Directed energy deposition · laser-wire DED |
| Build size | 300 x 300 x 350 mm (300 x 300 x 450 extended-feed option) | envelope 300 x 400 x 600 mm |
| Energy / lasers | See published specifications | Laser · wire deposition |
| Feedstock | Metal powder | Metal wire |
| Machine status | In development · review dated 2026-09-07 | Availability unconfirmed |
| Public price | Current quote required | Current quote required |
Build size is the maximum published physical space. Energy or laser counts describe the machine configuration; they do not prove a throughput winner.
What do these differences actually mean?
A difference may matter when your part size, material, production plan or process qualification requires it. Confirm the exact application with both suppliers; this page does not declare a winner.
What public specs cannot tell you
Real throughputYour geometry, orientation, parameters and finishing route matter.
Actual yieldPublished specs do not tell you your accepted-part rejection rate.
Total installed priceInstallation, training, service, software and options require a current quote.
Finished-part costPrinting is only one part of the complete accepted-part route.
Service qualityLocal response, parts availability and support experience need supplier validation.
Qualified application fitPublic specs cannot approve your material, parameters, tolerances or inspection plan.
Xact XM300G
More published specifications and source notes
| Published detail | Evidence |
|---|---|
| Xact XM300G specs | 300 x 300 x 350 mm (300 x 300 x 450 extended-feed option); one/two/four 400 W Yb fiber; 700 W selectable; 100% overlapping zonesOEM ↗ · Source reviewed |
| Published build envelope | Development-stage specification: 300 x 300 x 350 mm; optional extended feed permits 300 x 300 x 450 mm.OEM ↗ · OEM source checked |
| Layer thickness | 20–100 µm; development-stage specification.OEM ↗ · OEM source checked |
| Machine dimensions / footprint | Approximately 2019 x 845 x 2390 mm (W x D x H); development-stage specification.OEM ↗ · OEM source checked |
| Machine weight | Development-stage variants: XM300G approximately 726 kg; XM300G2 approximately 816 kg; XM300G4 approximately 907 kg.OEM ↗ · OEM source checked |
| Manufacturer positioning | Xact Metal presents the XM300G as a mid-sized system under development; shipping availability is not confirmed.OEM ↗ · OEM source checked |
| Materials — OEM scope | OEM development-stage powder options include AlSi10Mg, 316L, 17-4PH, 718, 625, Ti64 and M300; parameter availability on request.OEM ↗ · OEM source checked |
| Published print speed / throughput — stated basis | OEM development-stage build speed: 11.5 cc/hr for the single-400 W configuration; not finished-part throughput.OEM ↗ · OEM source checked |
Meltio M600
More published specifications and source notes
| Published detail | Evidence |
|---|---|
| Meltio M600 | envelope 300 x 400 x 600 mm; total laser power 1000 W; quad-wire head; system weight 800-1000 kg; 3-phase 400 V; wire-fed LMD DEDOEM ↗ · Source reviewed |
| Published build envelope | 300 x 400 x 600 mm (W x D x H) print envelope.OEM ↗ · OEM source checked |
| Machine dimensions / footprint | 1050 x 1050 x 1950 mm (W x D x H).OEM ↗ · OEM source checked |
| Machine weight | 800–1000 kg depending on options.OEM ↗ · OEM source checked |
| Gas / atmosphere — stated scope | Controlled inert enclosure with oxygen and humidity monitoring; specific gas supply conditions require confirmation.OEM ↗ · OEM source checked |
| Manufacturer positioning | Meltio presents the M600 as an industrial wire-fed metal printing system.OEM ↗ · OEM source checked |
| Materials — OEM scope | OEM-listed wire families: stainless, mild and carbon steels, titanium alloys and nickel alloys. Exact alloy parameters require confirmation; copper/aluminum parameters are listed as under development.OEM ↗ · OEM source checked |
These public specifications cannot establish a throughput, finished-part quality, support or price winner. Confirm usable envelope, exact alloy and process parameters, effective build time, finishing and local service for both options.