Machine evidence

WAAM3D MiniWAAM

Decision context / editorial guidance

Screen the application.
Then qualify the process.

Worth investigating if: your supplier can demonstrate the required alloy, geometry and finished-part specification on the quoted WAAM3D MiniWAAM configuration.

Do not buy on this page alone: a published envelope or machine configuration does not establish repeatability, accepted-part cost or local support.

Editorial purchasing guidance, not a verified recommendation for a particular application.

Published geometry / not guaranteed part fit

Front view shows X:Z proportions. Depth Y is stated numerically. Supports and clearance reduce usable space.

Compare this machine →

Manufacturer listing reviewed · confirm configuration

At a glance

What is it?

WAAM3D MiniWAAM is an industrial metal 3D printer using Wire arc DED.

How does it print?

Wire arc DED

When might I consider it?

Which is the better fit depends on your part, material, required output and qualified process.

Build space600 x 600 x 500 mmThis is the published build space for the stated configuration. Supports and process requirements can reduce usable space.

Print processPlasma transferred arcThis describes the machine configuration. Configuration alone does not establish build speed or finished-part output.

MaterialsSee supported material evidenceConfirm the exact alloy, settings and qualified process with the supplier.

Public priceQuote requiredUse a current configured supplier quote in any economic comparison.

What public specs cannot tell you: finished-part speed, cost, quality or fit for your exact application.

New to AM? Start with the 5-minute guide →

Directed energy deposition · wire-arc DED (WAAM) · WAAM3D

Explore process and material evidence →Compare machines

Availability and review notes

OEM listing reviewed 2026-09-08; confirm current availability, configuration and qualification with the supplier.

Source review: 2026-09-08. Source-specific review dates appear beside each fact.

Published capabilities

Capability	Source-backed detail
Build envelope	600 x 600 x 500 mmOEM ↗ · Source reviewed 2026-09-08
Energy source	Plasma transferred arcOEM ↗ · Source reviewed 2026-09-08

More published specifications and source notes

Published detail	Evidence
Materials	Titanium alloys, stainless steel and nickel alloys; confirm exact wire and parametersOEM ↗ · Source reviewed 2026-09-08
Inner chamber	1600 x 1500 x 1600 mm; not machine footprintOEM ↗ · Source reviewed 2026-09-08
Rotational table	60 kg payload; 500 mm diameterOEM ↗ · Source reviewed 2026-09-08
Atmosphere	Manufacturer lists oxygen below 50 ppmOEM ↗ · Source reviewed 2026-09-08
Machine dimensions / footprint	2400 x 2100 x 2300 mm (L x W x H), per current OEM machine-size table.OEM ↗ · OEM source checked 2026-09-09
Manufacturer positioning	WAAM3D positions MiniWAAM for prototypes, end-use parts and process/material research.OEM ↗ · OEM source checked 2026-09-09

What still needs a supplier answer

Purchasing question	Evidence gap
All-in delivered machine price	Current quote required
Build time for your part	Not verified for your geometry
Alloy and parameters	Confirm the exact qualified combination
Application fit	Confirm tolerances, finishing, inspection and local support

Source review dates identify when the cited material was reviewed. A source review is not a performance test; genuine third-party corroboration is identified separately.

Prepare a useful quote request

Send your exact alloy, dimensions, orientation, supports, inspection criteria and finishing route. Ask for usable build space and effective build time for that configuration. Include installation, training, service, software, gas supply and qualification in the delivered quote. Unverified fields on this page can be used as questions to confirm directly with the manufacturer before purchase.

Check material evidence →Considering this machine? Check comparable alternatives →Contribute a machine quote →Ask a question or suggest a correction →